Falling In mission walkthrough with the Mammoth Avenger
This guide walks you through the Falling In mission from Project Overthrow in GTA Online’s San Andreas Mercenaries update. You will scan with the Avenger’s bottom turret, locate barge crates, and deliver them to the lockup.
The steps are simple and friendly for new or returning players. It also fits a GTA Online beginner guide 2026 playbook while showing core Avenger controls and barge crate handling.
What you’ll learn
- How to use the Avenger autopilot and move into the hold
- How to scan with the bottom turret to reveal a green marker
- How to approach the barge and land on water or the stern deck
- How to fetch the crate and return it to the Avenger
- How to repeat the pickup for a second crate near the back of the barge
- How to fly the Avenger to the lockup to finish the job
What you need before you start
- Access to the Mammoth Avenger (the mission revolves around it)
- Basic flight control familiarity and camera switching
- Time for two crate pickups and a short delivery flight
- Expectation of some resistance on or near the barge
Step-by-step guide: Falling In GTA Online Avenger walkthrough
- Fly the Mammoth Avenger to the first waypoint. Engage autopilot when you are set up over the search area, then head into the hold.
- Sit at the turret station and switch to the bottom turret camera. Start scanning until you hear from Charlie and a green marker appears.
- Descend toward the barge. Land “in the drink” beside it for a quick swim, or set the Avenger down on the rear deck if it’s clear.
- Exit, fetch the crate, and return it to the Avenger. Lift off as soon as you are aboard.
- Move to the next marker. Scan again from the bottom turret. The second pickup tends to be near the back of the barge.
- Repeat the landing and retrieval. Deal with any resistance, then get airborne.
- Fly the Avenger to the lockup and deliver the goods to complete the mission.
Pro tips for the Falling In mission
- Set autopilot before leaving the cockpit so the Avenger holds position while you scan.
- If the camera view looks wrong, switch to the bottom turret. That is the scanner you need.
- Approach the barge from the stern; it is usually the calmest place to land or hover.
- Touch down lightly on the stern if it’s clear. If not, hover and drop to the water for a short swim.
- Keep the Avenger close to reduce swim time and exposure to resistance.
- Lift off as soon as the crate is aboard to avoid follow-up fire.
- Mark the lockup early so you can climb straight to it after the second pickup.
- Use gentle inputs when setting down on the deck to avoid sliding or clipping the superstructure.
Common mistakes
- Forgetting to engage autopilot before leaving the cockpit, which leads to drift while scanning
- Using the wrong turret camera and missing the green marker
- Landing too far from the barge and turning the swim into a time sink
- Parking on cluttered deck spots, risking damage on takeoff
- Lingering after pickup instead of lifting off and clearing the area
- Heading off before grabbing the second crate near the stern
Troubleshooting
No green marker appears while scanning
Confirm you are seated at the turret station and on the bottom turret camera. Keep scanning slowly around the barge until Charlie calls it in.
Autopilot won’t engage
Stabilize at a safe height over the search area, reduce abrupt inputs, then try autopilot again before leaving the cockpit.
Avenger drifts while you are in the hold
Return to the cockpit, re-center over the barge, and re-enable autopilot. Small course fixes help keep the scan aligned.
Can’t pick up the crate
Stand close to the crate and wait for the pickup prompt. If it still won’t trigger, adjust position slightly and try again.
Taking heavy fire on the deck
Abort the landing and hover beside the barge. Drop into the water for a quick grab, or set down again once the area is calmer.
Second marker does not show
Re-seat at the turret station and rescan the barge, focusing on the stern. Fly a short circle if needed, then try again.
Lockup marker missing after pickups
Climb to a safe height, check your map again, and set a waypoint to the lockup to guide the final leg.




